After seeing enough people adding solder to their ENIG-plated SD2SP2s, I made an improved variant that doesn't just fall out.
So, if you prefer the simple SD2SP2, you can now get it with the same satisfying fit as the Pro+:
store.makstech.io/sd2sp2-basic-p…
So, if you prefer the simple SD2SP2, you can now get it with the same satisfying fit as the Pro+:
store.makstech.io/sd2sp2-basic-p…
1
2
41
I further improved the compatibility with different LAN adapters of the USB Dolphin.
Now you will be able to use the Wii LAN Adapter:
github.com/makeo/usb-dolp…
Now you will be able to use the Wii LAN Adapter:
github.com/makeo/usb-dolp…
4
45
431
📢 I can finally show what's coming next - USB Dolphin - a USB 2.0 port for SP1 or Slot A/B.
Supports all kinds of USB storage devices, the SP1 variant even allows network game streaming (Swiss + RetroNAS/FSP) and more!
See all its features here:
store.makstech.io/usb-dolphin
Supports all kinds of USB storage devices, the SP1 variant even allows network game streaming (Swiss + RetroNAS/FSP) and more!
See all its features here:
store.makstech.io/usb-dolphin
9
88
817
📢 I added quite a few new toys to the store!
This includes USB Gecko's, PicoLoaders for the Panasonic Q and a variety of SD Adapters.
For US customers, prices include tariffs.
store.makstech.io
This includes USB Gecko's, PicoLoaders for the Panasonic Q and a variety of SD Adapters.
For US customers, prices include tariffs.
store.makstech.io
1
2
33
Cubiboot is here!
This gives you the cubeboot interface for PicoLoader and PicoBoot!
It has most of the features of cubeboot but supports SD2SP2, SD Gecko and similar SD adapters.
Check it out here: github.com/makeo/cubiboot
This gives you the cubeboot interface for PicoLoader and PicoBoot!
It has most of the features of cubeboot but supports SD2SP2, SD Gecko and similar SD adapters.
Check it out here: github.com/makeo/cubiboot
19
56
470
The solderless PicoLoader modules with replaceable flex cables are available to US customers!
store.makstech.io/products/picol…
And as a small treat (or trick), a teaser of something that is coming to PicoLoader and PicoBoot very soon!
store.makstech.io/products/picol…
And as a small treat (or trick), a teaser of something that is coming to PicoLoader and PicoBoot very soon!
17
36
285
The solderless PicoLoader modules are now available:
store.makstech.io
However, shipping to the US is currently unavailable - I really hope this is resolved soon.
Otherwise, if your country/region is not listed, you can send me a message and I will add it.
store.makstech.io
However, shipping to the US is currently unavailable - I really hope this is resolved soon.
Otherwise, if your country/region is not listed, you can send me a message and I will add it.
13
19
175
Fewer wires, but the state of the GameCube is even worse...
At least now my GameCube thinks a USB Stick is an SD card
At least now my GameCube thinks a USB Stick is an SD card
5
5
114
The batch of solderless PicoLoader modules arrived!
Now it's time for testing and packing...
Now it's time for testing and packing...
9
14
235
The solderless PicoLoader module works, uses the existing screw and looks stunning!
@silverstee1 outdid himself!
@silverstee1 outdid himself!
9
30
385
Announcing PicoLoader, an ODE-based modchip for the GameCube!
Similar to PicoBoot but easier to install, no soldering directly to the GC and other improvements.
Only requires a Raspberry Pi Pico, a flex PCB and a Diode.
And it's open-source: github.com/makeo/PicoLoad…
Similar to PicoBoot but easier to install, no soldering directly to the GC and other improvements.
Only requires a Raspberry Pi Pico, a flex PCB and a Diode.
And it's open-source: github.com/makeo/PicoLoad…
23
71
457
All the parts needed for PicoLoader - the mod for the GameCube I'm working on.
It should easily be less than $10.
Thanks to @silverstee1 for making the PCB and mount!
It should easily be less than $10.
Thanks to @silverstee1 for making the PCB and mount!
4
2
18